Sharp XL-UH2000H Operation Manual page 47

Remote control
Symptom
The remote control does
not operate.
Tuner
Symptom
The radio makes unusual
noises continuously.
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
Possible cause
Is the AC power lead of the unit
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle
incorrect?
Does the remote control sensor
receive strong light?
Possible cause
Is the unit placed near the TV or
computer?
Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Factory Reset, Clearing All Memory
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the
the ON/STAND-BY button until "CLEAR ALL" appears.
ON/
STAND-BY
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
1 button and the 5 button, press
XL-UH2000H
ENGLISH
E-36