Sharp XL-UH2000H Operation Manual page 42

Timer and sleep operation (Remote Control only) (continued)
XL-UH2000H
ENGLISH
4
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY but-
ton.
5
Press the
press the MEMORY button.
The illustrations show the timer playback setting in the daily tim-
er mode.
6
Press the
press the MEMORY button.
7
Set the time to finish as in steps 5 and 6 above.
E-31
or button to select
or button to adjust the hour and then
or button to adjust the minutes and then
8
Switch input with the
MEMORY button.
To select the timer playback source: CD or TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY button.
If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
9
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
10
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
or button, and then press the
Continued to the next page