Table of Contents
Advertisement
Troubleshooting
Problem
PS does not appear
A PS code cannot be received for the reason of bad receiving conditions, etc.
even if an RDS station
A PS code appears if it is received. Wait for a while until conditions
is tuned in to.
change.
("NO PS" appears.)
When the station changed between programs, the unit could not receive the PTY
Receiving programs
code.
differs from PTY that
An appropriate programme is searched for and tuned in to after receiving a
was already set up.
corresponding PTY code. Therefore, wait for a while.
Any specifi ed PTY programs cannot be received. There is no desired programme
"NONE" appears when
being broadcast in your area.
selecting PTY.
Select another PTY, or wait until a desired programme starts.
The unit received a station broadcasting time that is not appropriate for you, or
The clock time (CT) is
the unit is receiving a station that does not broadcast time.
not accurate.
Receive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
There is little difference in receiving conditions between the current station and
An AF station cannot
AF stations. Update of the AF list ended in failure.
be received even if AF
Wait until the AF list is successfully updated. For unstable reception, tune
indicator lights.
in to a stable station by the hand.
The disc is inserted upside down.
Insert a disc correctly.
No playback or disc
ejected
There is a fl aw or foreign material on the disc.
Remove the foreign material, or use a fl awless disc.
Sound skipping or
There is a fl aw or foreign material on the disc.
noise
Remove the foreign material, or use a fl awless disc.
The unit is not suffi ciently secured.
Secure the unit to the console box.
Sound skipping due to
vibration
The unit is tilted at over 30˚ in the front-to-end direction.
Make the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
Consult your dealer.
Disc unejectable
The microcontroller in the unit operates abnormally due to noise or other factors.
Unplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
34
CQ-C5355N
Possible cause
Possible solution
Problem
Possible cause
The disc has unplayable formatted data.
No playback or disc
Refer to the description about MP3/WMA for playable sound data except
ejected
CD-DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
The CD-R/RWs that
recording software and recorder to be used even if these CD-R/RWs are playable
are playable on
on other devices such as a PC.
other devices are not
Make CD-R/RWs in different combination of media, recording software and
playable on this unit.
recorder after referring to the description about MP3/WMA.
There is a fl aw or foreign material on the disc.
Remove the foreign material, or use a fl awless disc. For MP3/WMA, refer
to the description about MP3/WMA.
Sound skipping or
noise
Playing VBR (Variable Bit Rate) fi les may cause sound skipping.
Play Non-VBR fi les.
The USB device and USB extension cable are not connected correctly.
Connect the USB device and USB extension cable correctly.
There is no music stored in a format that can be played on this unit.
Check if there is any music data that can be played stored on the USB
Music is not played
device.
back even if the USB
device is connected.
The fi le system of the USB device is not compatible with this unit.
Use a USB device with a FAT12/16/32 fi le system.
The current consumption of the USB device exceeds 500 mA.
Use a USB device with a current consumption lower than 500 mA.
A USB Hub is connected.
Do not use a USB Hub.
"READING" is
displayed but music is
A number of recorded folders/fi les.
not played back.
When there are a number of recorded folders/fi les, it may take a long time
to read all of the fi les.
Possible solution
35
CQ-C5355N
Hide quick links:
Advertisement
Table of Contents
