Audio Setting - Panasonic CQ-C5355N Operating Instructions Manual

Audio Setting

Adjustment to each speaker
1
Press [VOL] (PUSH SEL:
Select) to open the menu.
2
Press [VOL] (PUSH SEL: Select) to
select a mode to be adjusted.
3
Turn [VOL] clockwise
or counterclockwise to
adjust.
Notes:
• The sequence and contents of setting items may
depend on the conditions of devices to be connected.
For further information, refer to the System Upgrade
Guidebook or the instruction manuals for the devices
to be connected.
• To return to the regular mode, press [DISP].
• If no operation takes place for more than 5 seconds in
audio setting (2 seconds in the volume adjustment,
10 seconds in the SQ adjustment), the display returns
to the regular mode.
• The volume can also be adjusted directly using [VOL]

on the main unit. ( page 11)
• Please refer to page 13 for calling up a preset SQ.
• If you enable SRS WOW, the following functions are
automatically disables:
· SQ
· Bass/treble adjustment
· Balance/fader adjustment
28
CQ-C5355N
Volume Adjustment
(Setting range: 0 to 40, Default: 18)
 : Up
 : Down
SRS WOW On/Off Setting
(Setting range: On/Off, Default: Off)
 : On
 : Off
Please refer to page 12 for SRS WOW setting.
Bass Adjustment
(Setting range: 12 dB to 12 dB, 2 dB Step, Default:
Bass 0 dB)
 : Up
 : Down
Treble Adjustment
(Setting range: 12 dB to 12 dB, 2 dB Step, Default:
Treble 0 dB)
 : Up
 : Down
Note: Do not activate SQ and Bass/Treble at the same
time to avoid causing sound distortion.
SQ Adjustment

( page 13)
(Adjustable frequency:
12 dB to 12 dB (by
2 dB))
Setting range:
SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz,
200 Hz)
SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz,
3 kHz)
SQ High/Treble: ±12 dB (at 8 kHz, 10 kHz, 12 kHz,
15 kHz)
Balance Adjustment
(Setting range: L (left) 15 to R (right) 15 and Centre,
Default: Centre)
 : Right enhanced
 : Left enhanced
Fader Adjustment
(Setting range: R (rear) 15 to F (front) 15 and Centre,
Default: Centre)
 : Front enhanced
 : Rear enhanced
29
CQ-C5355N