Table of Contents
Advertisement
ELECTRIC HOTPLATES
To switch on a hotplate, turn the relevant
control knob to the required heat setting.
The control knob is numbered 0 – 6
0 – OFF
1 – Minimum
6 – Maximum.
The hob has two types of hotplates:
Normal Hotplates
We recommend the plates are switched to
maximum (6) for a short while to boost the
plate, and then adjusted to the required setting.
Rapid Hotplate (Front right)
The rapid hotplate indicated by a red spot, will
heat up more quickly than a normal plate.
Over a period of time the red spot may
disappear, this will not affect the
performance of the hotplate.
It is important to note that the
hotplate may smoke and produce a
slightly unpleasant odor when used for
the first time. This is quite normal and will
disappear after some time.
Main pilot light
This light will illuminate when the oven
function control knob is set or the hotplate
control knobs are turned on and remain lit
while these are in use.
Do not put anything on the hob that
is liable to melt.
6
Advertisement
Table of Contents
