6 Customizing
This. section. describes. the. various. setting.
option.of.this.BD.player..
If.the.setup.option.is.grayed.out,.it.means.
the. setting. cannot. be. changed. at. the.
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
... General Setting ...
System
Language
Playback
Security
Network
Move cursor key to select menu option
then use "OK" key to select
2. Press to.select.an.option,.then.press
.to.access.
3. Press / to.select.a.setup.option.and
press ..
4. Select.the.setting.you.wish.to.change
and press OK to confirm.
- Press to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.to.
personalize your BD player.
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.10.minutes.with.no.
operation.
-.The.BD.player.will.switch.to.standby.
mode.if.there.is.no.operation.after.the.
screen.saver.is.engaged.for.
approximately.20.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode..
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc.playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics Control) protocol. You can
1
Screen Saver
On
Disc Auto Playback
On
CEC
On
Easy Setup
More...
Load Default
More...
Exit
SETUP
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.BD.player.on,.pressing.SETUP,.PLAY/
PAUSE.will..power.on.the.TV.When.you.
turn.the.TV.off,.this.unit.will.
automatically.turn.off.
{Off}.-.Disables.REGZA-LINK.features.
[Easy Setup]
•
Re-configure some settings. It is the same
as."Load.Default".of.steps.4-8.
Tip:
For setting OSD language, TV resolution and TV
aspect.
• [Load Default]
Reset.all.settings.of.BD.player.to.initial.
default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
Loading default, please wait...
30%
4..TV.will.display.as.follow:
Welcome
to the Toshiba BD Player Setting Wizard.
Some simple settings are suggested before
you begin. You can also access detailed
settings from the Setup Menu.
5. Press OK, enter language setting.
..Press.OK,.enter.language.setting..
Press/ to.select.a.language.option.
Choose
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
Previous
Cancel
OK
Next
OK
English
Next
OK