Table of Contents
Advertisement
30
Customizing
This section describes the various setting options of this Blu-ray Disc™ and Online Media.
If the setup option is greyed out, it means the setting cannot be changed at the current state.
1
Press the SETTING button in stop mode to display the setup screen.
2
Press OK to enter the Setting menu.
3
Use the
button to select an option and press OK.
/
4
Press the
button or the BACK button to return to the previous menu.
Miracast
(Sample Illustration) General operations settings
You can also access your settings via the Settings icon on the ePortal.
Audio Setting
1
In the Setting menu, use the
2
Press the
/
3
Use the
button to select the desired audio setting and press OK.
/
4
Press the
button or the BACK button to return to the previous menu.
SPDIF
When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:
Bitstream: Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby
®
DTS
or PCM audio signal.
PCM: Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo
audio signal.
Re-encode: Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby
®
DTS
and you want to hear both PIP audio and the movie audio on Blu-ray™ video.
Off: No audio will be output via COAXIAL DIGITAL output jack.
HDMI
When you connect an HDMI
Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolby
PCM audio signal.
PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.
Re-encode: Selects Re-encode if your receiver's HDMI IN supports Dolby
want to hear both PIP audio and movie audio on Blu-ray™ video.
Off: No audio will be output via HDMI OUT jack.
Playback
Display
Portal
Audio
System
Setting
Network
Photo
Language
Video
button to select Audio and press OK.
/
button to select an option and press OK.
®
device to the HDMI OUT jack, the available options are:
Customizing
®
or
®
or
®
®
or DTS
or
®
®
or DTS
and you
Advertisement
Table of Contents
