Customizing; General.setting - Toshiba BDX3200KR Owner's Manual

6 Customizing

This.section.describes.the.various.setting
option.of.this.Blu-ray.Disc
If.the.setup.option.is.greyed.out,.it.means.
the.setting.cannot.be.changed.at.the
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Setup.Menu.appears.
General Setting
System Screen Saver
Language Disc Auto Playback
CEC
Playback
Security Load Default
Upgrade
Network
Move cursor key to select menu option
then use "OK" key to select
2. Press  to.select.an.option,.then.press
.to.access.
3. Press / to.select.a.setup.option.and
press ..
4. Select.the.setting.you.wish.to.change
and press OK to confirm.
- Press  to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.
to.personalize.your.Blu-ray.Disc
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.5.minutes.with.no.
operation.
-.The.Blu-ray.Disc
TM
standby.mode.if.there.is.no.operation.
after.the.screen.saver.is.engaged.for.
approximately.15.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode..
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc.playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
.player..
TM
On
On
On
More...
More...
Exit
SETUP
..player.
TM
.player.will.switch.to.
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.Blu-ray.Disc .player.on,.pressing.
TM
SETUP,.PLAY/PAUSE.will..power.on.the.
TV..When.you.turn.the.TV.off,.this.unit.
will.automatically.turn.off.
{Off}.-.Disables.REGZA-LINK.features.
• [Load Default]
Reset.all.settings.of.Blu-ray.Disc™.player.
to.initial.default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
3..It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
Loading default, please wait...
30%
4..TV.will.display.as.follow:
Добро пожаловать
в мастер настройки проигрывателя дисков
Blu-ray Диск
Перед началом воспроизведения
рекомендуется сделать начальные
настройки. Полную настройку можно
сделать позже через меню установки.
5. Press OK, enter language setting. ..Press.OK,.enter.language.setting..
Press/ to.select.a.language.option.
Выбрать
OSD
В а
, а OSD, . .
П .
6. Press OK, enter Resolution setting. ..Press.OK,.enter.Resolution.setting..
Cancel
OK
След
OK
English
Р
С
OK
1