Table of Contents
Advertisement
Electrical Requirements
Working Temperature
Power Cord
Battery
Capacity/Accuracy
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
1.
Plug the wires threaded through the Support Tube (4) into the Base (6).
2.
Secure the Support Tube to the Base using Hex Bolts (5).
3.
Plug the wires at the top of the Support Tube into the Display (1), slide the
Display onto the top of the Support Tube, and secure with the Hex Nut (2) and
Hex Bolt (3).
read the entire iMportant saFeguards section at the beginning of
this manual including all text under subheadings therein before set up or
use of this product.
Warning
1.
Wipe down the non-electrical parts of the unit before use with a mild detergent
and dry with a soft cloth.
2.
Allow unit to dry completely before assembly or use.
SKU 96823
For technical questions, please call 1-800-444-3353.
speciFications
120 V~ / 60 Hz
14°~104° F (-10°~+40° C)
< 90% Relative Humidity
18 AWG X3C SVT X 6FT
6 Volt lead-acid Battery (included)
0.88 to 130 Pounds ± 0.001 Pound
(400g to 60 Kg ± 0.5g)
household use onlY
unpacking
asseMbling
cleaning
risk oF shock!
before cleaning appliance, make sure the appliance's switch
is turned off and the cord is unplugged.
do not immerse motor/heating element, cord, or plug in
water or any other liquid.
Page 4
- Quick Links:
- Operation
Hide quick links:
Advertisement
Table of Contents
