Advertisement
Power Requirements
Maximum Weight
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
read the entire warning section at the beginning of this manual
including all text under subheadings therein before set up or use of this
product.
1.
Open the Cover on the back on the scale, and paying attention to proper
polarity, install three AAA batteries. Replace the Cover.
2.
Push the ON/OFF button to turn the unit on. If the Scale is not showing a
reading of "0.00" or "0.0", push the Tare Button to zero it out.
3.
Choose the unit of measure by pushing the Unit Button. Weight can be
displayed in kilograms (kg), pounds (Lb) or ounces (oz).
4.
Hold the Scale by the Top Ring or connect it firmly to a hook or rope, and
suspend the item being weighed from the Hook.
5.
A container can also be suspended from the Hook. Push the Tare button so that
the weight of the container will not be taken into account, before placing the item
to be weighed into the container.
6.
Read the Display to see the weight of the item.
7.
To prevent accidents, turn off the tool and remove the batteries after use. Clean,
then store the tool indoors out of children's reach.
1.
BeFOre eacH use, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts and
any other condition that may affect its safe operation.
2.
When replacing batteries, dispose of old batteries according to type in a manner
consistent with State, local, and Federal laws and regulations.
3.
aFter use, clean external surfaces of the tool with clean, moist cloth.
.
SKU 97227
speciFicatiOns
unpacKing
Operating instructiOns
Maintenance and serVicing
For technical questions, please call 1-800-444-3353.
Three 1.5V AAA Batteries (included)
45 Pounds
Page 3
Advertisement
