Table of Contents
Advertisement
Quick Links
ELECTRIC PLATFORM SCALE
330 LB. WEIGHT CAPACITY
SET uP And OPERATInG InSTRuCTIOnS
distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MAnuAL.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
Scale not legal for trade or postage.
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
98982
®
.
Advertisement
Table of Contents
Related Manuals for CEN-TECH CEN-TECH 98982
Summary of Contents for CEN-TECH CEN-TECH 98982
- Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
-
Page 2: General Safety Warnings
Work area safety Keep work area clean and well lit. Cluttered or dark areas invite acci- dents. do not operate the Scale in explo- sive atmospheres, such as in the presence of flammable liquids, gases or dust. Line operated and... - Page 3 There is an increased risk of electric shock if your body is grounded. do not expose the Scale to rain or wet conditions. Water entering the Scale will increase the risk of electric shock. do not abuse the Power Cord (17).
-
Page 4: Specific Safety Warnings
Specific Safety Warnings Maintain labels and nameplates on the Scale. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. This Scale contains a sealed lead Battery (16). Do not dispose of an old Battery in fire to avoid explosion and possible personal injury. -
Page 5: Grounded Tools: Tools With Three Prong Plugs
Power Cord Plug provided with the Scale. never remove the grounding prong from the Plug. do not use the if the Power Cord or Plug is damaged. -
Page 6: Extension Cords
of electric shock. (See 3-Prong Plug and Outlet.) The grounding prong in the Plug is connected through the green wire inside the Cord to the grounding system in the equipment. The green wire in the Cord must be the only wire connected to the equipment’s grounding system and must never be attached to an electrically “live”... -
Page 7: Specifications
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. OPERATInG InSTRuCTIOnS... - Page 8 (13) FIGuRE C LEVEL IndICATOR The four Adjustable Feet (11) and Level Indicator (14) of the Scale are used for leveling the unit. Use the Adjustable Feet and Level Indicator to level the Scale accordingly. (See Figures B and C.) Make sure the sides of the Scale’s...
-
Page 9: Memory Functions
Remove all weight and press the “ZERO/TARE” button again to exit tare mode. Full Scale. The full capacity of the scale. For this item, 330 lb. (150 kg). SKU 98982 For technical questions, please call 1-800-444-3353. -
Page 10: Error Information
Turn the scale off. Calibration must be started when first turning on the scale. Connect the scale to an 120 V~ re- ceptacle and remove all weight from the scale. Turn on the Scale. Quickly press “ZERO/TARE”, “UNIT”, then “ZERO/... -
Page 11: Maintenance And Servicing
IMPORTANT: The old Battery (16) must be recycled according to local solid waste authority instructions. AFTER USE: surfaces of the Scale with soft, clean cloth. Do not use solvents. Do not immerse the Scale in liquid. A Bat- WARnInG! If the Power Cord... -
Page 12: Parts List & Assembly Diagram
PARTS LIST & ASSEMBLY dIAGRAM Part # description Display Bolt Steel Tube Steel Base Bolt Upper Stand Sensor Bolt SKU 98982 For technical questions, please call 1-800-444-3353. Qty. Part # description Lower Stand Adjustable Foot Bolt Platform Level Indicator Power Switch Battery Power Cord/Plug Screw... -
Page 13: Limited 90-Day Warranty
LIMITEd 90 dAY WARRAnTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.