Yamaha F30A Owner's Manual page 65

UP
UP
DN
DN
2) Push the power trim/tilt switch "UP"
until the outboard has tilted up com-
pletely.
701034*
3) Push the tilt support knob into the
clamp bracket to support the engine.
w
After tilting the engine, be sure to sup-
port it with the tilt support knob. Other-
wise, the engine could fall back down
suddenly if oil in the power trim/tilt unit
should lose pressure.
403065
EMU01151
PROCEDURE FOR TILTING DOWN
Hydro-tilt model
1) Release the tilt-lock lever.
2) Hold the rear of the top cowling with
one hand, tilt the engine up slightly
and pull out the tilt support knob.
3) Slowly tilt the engine down.
4) Place the tilt-lock lever back into the
402076
lock position.
EMU01328
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch "UP"
until the engine is supported by the
tilt rod.
2) Pull out the tilt support knob.
3) Push the power trim/tilt switch "DN"
(Down) to lower the engine to the
411042
desired position.
3-22
E