Spoke Wheels; Adjusting The Clutch Free Play - Yamaha TT-R110EY Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
sively worn tires decreases
riding stability and can lead to
loss of control.
G The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.
G It is not recommended to patch
a punctured tube. If unavoid-
able, however, patch the tube
very carefully and replace it as
soon as possible with a high-
quality product.
7

Spoke wheels

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the following
regarding the specified wheels.
G The wheel rims should be checked
for cracks, bends or warpage, and
the spokes for looseness or dam-
age before each ride. If any dam-
age is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.
G
The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
G
Ride at moderate speeds after
changing a tire since the tire sur-
face must first be "broken in" for it
to develop its optimal characteris-
tics.
7-16
EAU21940

Adjusting the clutch free play

The clutch free play must be checked
and, if necessary, adjusted as follows
points at the intervals specified in the periodic
maintenance and lubrication chart.
1. Loosen the locknut.
2. Slowly turn the clutch adjusting
screw in direction (a) until resis-
tance is felt, and then turn it 1/8
turn in direction (b).
(b)
1
1. Locknut
2. Clutch adjusting screw
3. Tighten the locknut to the specified
torque.
Tightening torque:
Locknut:
8.0 Nm (0.8 m·kgf, 5.8 ft·lbf)
EAU44663
(a)
2