Pilot Flame Characteristics; Main Burner Flame Characteristics - HouseWarmer HWDV080DVN-1 Owner's Manual

Direct vent wall furnace
Hide thumbs Also See for HWDV080DVN-1:
Table of Contents

Advertisement

1

MAIN BURNER FLAME CHARACTERISTICS

1
24632-0-0508

PILOT FLAME CHARACTERISTICS

The pilot flame is blue and goes toward the main burner
and thermocouple horizontally. A slight yellow tip on the
flame is normal. The pilot flame must surround and extend
approximately 1/4" (6 mm) beyond the thermocouple, and
must extend beyond the first row toward the second row
of main burner ports.
On the main burner, the burning gas forms a primary
flame and a secondary flame. The primary flame is blue
and about 3/16" (5 mm) high. The secondary flame is
very pale blue, 3" (76 mm) to 5" (127 mm) high. Dust in
the combustion air will produce an orange flame. Do not
mistake it for an improper yellow flame.
Page 39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents