Transcend MP330 User Manual page 34

Hide thumbs Also See for MP330:
Table of Contents

Advertisement

Cannot RECORD voice, Line-In, or the FM radio
To make sure recorded files do not get lost, two safety mechanisms are built into the MP330:
If remaining battery capacity is less than 10%, you cannot enter the RECORD Mode.
While recording, if the remaining battery capacity goes below 10% the MP330 will automatically stop
and save the recording.
Track playback sounds intermittent
Unplug the earphones and plug them back in again to make sure they are securely connected.
MP330 powers off automatically
The MP330 features SLEEP Mode and Auto Power Off functions, which are power-saving features. You can
preset your MP330 to power-off automatically. Please refer to the SETTINGS section for more information.
MP330 just isn't working properly
If your MP330 ever stops working properly, or locks up, try powering it on and off a few times, if this does not
correct the problem you can Reset the MP330 by using a paperclip or pencil tip to hold down the "Reset" button
for 3 to 5 seconds.
Cannot find the file that was just copied to the MP330
Re-copy the file and refer to the "Disconnecting from a Computer" section to remove the MP330 after the copy
process is completed.
A File that was just deleted still appears
Re-delete the file and refer to the "Disconnecting from a Computer" section to remove the MP330 after the
delete process is completed.
MP330 does not operate after formatting in Windows
Formatting the MP330 using the "Quick Format," or "Full Format" option in Windows
system information that the MP330 requires to operate. To re-install the system information, please visit
http://www.transcend.com.tw/ and download a Firmware Update for your MP330.
How do I find out what Windows Media Player version I am using?
Open your Windows Media Player program.
Click on the "Help" menu and select the "About Windows Media Player" option.
The version of your Windows Media Player will be displayed on the computer screen.
Cannot listen to DRM music on my MP330?
The MP330 only supports WMA-DRM10 music files, is this the file type you are using?
You must use Windows Media Player 10 to transfer and synchronize your WMA-DRM10 music files
with the MP330‟s
Lyrics Sync: Why can't I see the words of the song I am listening to?
3. For detailed Lyrics Sync instructions, please see the FAQ section on our website at:
http://www.transcend.com.tw/Support/FAQ
An "Insuffucient Power" message is displayed on the screen
MTPMEDIA
Folder.
®
34
®
erases the default

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents