Internet - TP-Link TD-W8151N User Manual

TD-W8151N
Click any of them, and you will be able to configure the corresponding function.

4.3.1 Internet

Choose "Interface Setup→Internet" menu, you can configure the parameters for WAN ports in
the next screen (shown in Figure 4-6).
ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path

Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup
8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
need to activate the VC to take effect. For PVCs management, you can use ATM QoS to
setup each PVC traffic line's priority.

Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.

Status: If you want to use a designed VC, you should activate it.

VPI: Identifies the virtual path between endpoints in an ATM network. The valid range is
from 0 to 255. Please input the value provided by your ISP.

VCI: Identifies the virtual channel endpoints in an ATM network. The valid range is from
32 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value
provided by your ISP.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-5
Figure 4-6
21