Installation Environment; Connecting The Modem Router - TP-Link TD-W8151N User Manual

TD-W8151N
 Antenna: Used for wireless operation and data transmit.

2.3 Installation Environment

 The Product should not be located where it will be exposed to moisture or excessive heat.
 Place the Router in a location where it can be connected to the various devices as well as to a
power source.
 Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
 The Router can be placed on a shelf or desktop.
Keep away from the strong electromagnetic radiation and the device of electromagnetic

sensitive.

Note:
The diameter of the screw, 3.5mm<D<7.8mm, and the distance of two screws is 107.5mm. The
screw that project from the wall need around 4mm based, and the length of the screw need to be
at least 20mm to withstand the weight of the product.

2.4 Connecting the Modem Router

Before installing the device, please make sure your broadband service provided by your ISP is
available. If there is any problem, please contact your ISP. Before cable connection, cut off the
power supply and keep your hands dry. You can follow the steps below to install it.
Step 1: Connect the ADSL Line.
Method one: Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 2-3
6