Front Panel - NETGEAR DGN1000 User Manual

Front Panel

The following figure shows the status LEDs and icons on the wireless modem router front
panel. Note that the Wireless and WPS icons are buttons.
WPS On/Off button
Wireless On/Off button
Figure 5. Front panel LED Icons
The tables describe the LEDs, icons, and buttons on the front panel from left to right.
Table 1. Power On/Off button
Icons LED Activity
Solid green.
Solid red
Off
Restore Factory
Settings
N150 Wireless ADSL2+ Modem Router DGN1000
Description
Power is supplied to the router.
POST (power-on self-test) failure or a device malfunction has occurred.
Power is not supplied to the router.
Light blinks momentarily when the Restore Factory Settings button on the
bottom of the unit is pressed for 6 seconds. The Power LED then blinks red
three times when the Restore Factory Settings button is released and then
turns green as the gateway resets to the factory defaults.
Hardware Setup
10
WPS
Wireless
Internet
DSL
LAN Ports
Power