NETGEAR DGN1000 User Manual page 67

N150 wireless adsl2+ modem router
Hide thumbs Also See for DGN1000:
Table of Contents

Advertisement

N150 Wireless ADSL2+ Modem Router DGN1000
Gateway IP Address. The IP address used as a gateway to the Internet for
computers configured to use DHCP.
Domain Name Server. The wireless modem router DNS server IP addresses. These
addresses are usually obtained dynamically from the ISP.
LAN Port (Local Ports).
MAC Address. The wireless modem router LAN port Ethernet MAC address.
IP Address. The wireless modem router LAN port IP address. The default is
192.168.0.1.
DHCP. If Off, the wireless modem router does not assign IP addresses to PCs on the
LAN. If On, the wireless modem router does assign IP addresses to PCs on the LAN.
IP Subnet Mask. The IP subnet mask used by the wireless modem router LAN. The
default is 255.255.255.0.
Modem.
ADSL Firmware Version. The version of the firmware.
Modem Status. The connection status of the modem.
DownStream Connection Speed. The modem receives data from the DSL line at
this speed.
UpStream Connection Speed. The modem transmits data to the DSL line at this
speed.
VPI. The Virtual Path Identifier setting.
VCI. The Virtual Channel Identifier setting.
Wireless Port. See
Wireless Settings Screen
settings.
Name (SSID). The Wi-Fi network name (service set ID) for the wireless network.
Region. The country where the unit is set up for use.
Channel. The current channel, which determines the operating frequency.
Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless
LED on the front panel is off.
Broadcast Name. Indicates if the wireless modem router is configured to broadcast
its SSID.
on page 37 for a description of these
Network Maintenance
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

N150

Table of Contents