Table of Contents
Advertisement
E_8fp.book Page 13 Tuesday, March 28, 2006 4:35 PM
ESU00521
Drive guard
The drive guard is designed to cover the V-belt clutch
and V-belt in case parts break or come loose.
WARNING
@
G
Make sure that the drive guard is tightened
securely before operating the snowmobile.
G
Never run the engine with the V-belt or drive
guard removed.
@
ESU00053
V-belt holders
Keep a spare V-belt for emergency use by placing it into
the V-belt holders provided.
CAUTION :
@
Make sure that the V-belt is installed securely in the
holders.
@
ESU00680
Storage compartment
Open the storage compartment to store the service
tools, spare parts, or other small items.
ESU05020
Rear carrier
For RX10M/RX10MS
The rear carrier is located at the rear of the snowmobile.
1 Rear carrier
Maximum load limit: 10 kg (22 lb)
WARNING
@
Do not use the rear carrier to lift the snowmobile.
The snowmobile could fall, which could result in
severe injury or death.
@
5-13
Advertisement
Table of Contents
