Drive Track; 51-Mm (2.0-In) High-Profile Pattern Drive Track - Yamaha RX10RW Owner's Manual

8fp-28199-12
Table of Contents

Advertisement

E_8fp.book Page 8 Tuesday, March 28, 2006 4:35 PM
ESU00097

Drive track

Check the drive track for deflection, wear, or damage.
Adjust or replace if necessary. (See pages 8-32–8-34 for
more details.)
WARNING
@
Do not operate the snowmobile if you find damage to
the drive track, or if it has been maladjusted. Drive
track damage or failure could result in loss of brak-
ing ability and snowmobile control, which could
cause an accident.
@
ESU02430

51-mm (2.0-in) high-profile pattern drive track

For RX10M/RX10MS
This snowmobile is originally equipped with a 50-mm
(2.0-in) high-profile pattern drive track specifically for use
in deep snow riding conditions.
Therefore, avoid prolonged operation on hard surfaces
such as ice, hard-packed snow, dirt, etc., to extend the
life of the track and slide runners.
CAUTION :
@
G
Only use in deep snow riding conditions.
G
Operation on areas with light snowfall, ice, hard-
packed snow, dirt, or grass will result in rapid
wear or damage to the track and slide runners
from lack of snow which serves as a lubricant.
@
6-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx10rtrwRx10mswRx10mwRxw10w

Table of Contents