La Crosse Technology WIRELESS WEATHER STATION Instruction Manual page 5

Wireless 868 mhz weather station

Hide thumbs Also See for WIRELESS WEATHER STATION:

Table of Contents

the batteries are in place, all segments of the LCD will light up briefly

sound. Following the indoor

information are not displayed on the LCD after 60 seconds, remove the batteries from both units and

wait for at least 60 seconds before reinserting them.

The outdoor temperature

Weather Station. Also, the signal reception icon will be displayed. If this does not happen after 2

minutes, the batteries will need to be removed from both units and reset from step 1.

Insert the batteries in the second transmitter as soon as the outdoor temperature readings from the

first transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather

Station displays the information of the first transmitter.

The outdoor temperature from the second transmitter and the "channel 2" icon should then be

displayed on the Weather Station. If this does not happen after 2 minutes, the batteries will need to

be removed from all the units and reset from step 1.

Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are

displayed on the Weather Station. Then within 2 minutes, the channel 3 outdoor data from the third

transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is

successfully received. If this is not happen, user shall restart the setting up from step 1.

Note :

User shall insert the batteries into the third transmitter within 45 seconds after the Weather

Station displays the information of the first transmitter. Or immediately after reception of the second

transmitter is

finished.

In order to ensure sufficient 868 MHz transmission however, the distance between the Weather

Station and the transmitter should not be more than 100 meters (see notes on "Positioning" and

"868 MHz

Reception").

temperature/humidity

and the time as 0:00 will be displayed. If these

data

from the first transmitter (channel 1) should then be displayed on the

and a short signal tine will

Table of Contents

Dcf-77