Positioning The Weather Station - La Crosse Technology WIRELESS WEATHER STATION Instruction Manual

POSITIONING THE WEATHER STATION

The Weather Station comes attached with a removable table stand, which provides the
option of table standing or wall mounting the unit. Before wall mounting, please check that
the outdoor temperature can be received from the desired locations. To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by
about 5mm.
2. Remove the stand from the Weather Station by pulling it away from the base and
hang the station onto the screw. Remember to ensure that it locks into place before
releasing.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The sensor is supplied with a holder that may be attached to a wall with the two
screws supplied. The sensor can also be position on a flat surface by securing the
stand to the bottom to the transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic anchors.
2. Clip the sensor onto the bracket.
48