Getting Started; Setup & Power-On - Yamaha RY8 Owner's Manual

GETTING STARTED

5. SETUP & POWER-ON
The RY8 can be powered by either an optional AC adaptor or six
batteries. Follow the instructions below based on the power source you
intend to use.
USING A POWER ADAPTOR.
Plug the DC output cable from an optional Yamaha PA-3 or PA-1B AC Adaptor
(available from your Yamaha dealer) snugly into the [DC IN] jack on the rear
panel, then plug the adaptor into a convenient wall AC power outlet.
Do not attempt to use an AC adaptor other than the Yamaha PA-3 or PA-1B. The use of an
incompatible adaptor may cause irreparable damage to the RY8, and may even pose a serious
WARNING
shock hazard! ALWAYS UNPLUG THE AC ADAPTOR FROM THE AC POWER OUTLET WHEN
THE RY8 IS NOT IN USE.
When the AC adaptor plug is inserted into the RY8's [DC IN] jack, the batteries are automatically
disconnected.
12