Table of Contents
Advertisement
4.
Turn the Slide Bar (36) so it points to the Pulley (65) and tightens the tension on the
Sanding Belt (66). Replace Cover (23) and Screw (26).
5.
If needed, adjust the tracking of the Sanding Belt by turning the Adjustment Screw (59).
Sanding
Belt (66)
Roller (65)
Switch (48)
Brush Cover (41)
1.
Secure the workpiece to be sanded.
2.
Loosen Screw (49) and adjust Bracket (22) to the desired angle for sanding.
3.
Plug the Line Cord (52) into a GFCI electrical outlet.
4.
Always follow all safety instructions and warnings in this instruction manual.
for technical questions, please call 1-800-444-3353.
SKU 92158
Cover (23)
Slide Lock (36)
OperAting instructiOns
controls
Screw (49)
Angle Adjust
Operation
Screw (26)
Slide Lock (36)
Loosen Sanding Belt
Adjusting Screw (59)
Sanding Belt Tracking
Bracket (22)
Spindle (24)
Page 9
Hide quick links:
Advertisement
Table of Contents
