Installing The Tv; Preventing The Tv From Toppling Over - Sony WEGA KLV-S23A10 Operating Instructions Manual

Installing the TV
Preventing the TV
from Toppling Over
Attaching the Support Belt
Introducing the TV
1
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2 Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.
3 Adjust the length by pulling the support belt towards you while holding
the TV stand.
_-j Be sure to take measures to prevent the TV from toppling over and
causing injury.
The supplied wood screw may not be used depending on the type of TV
stand. In this case or when the secunng strength is not enough
prepare commercial screws to fit to the TV stand. Use commercial
screws of 3 to 4 mm diameter. Consult your dealer about the types of
screw.
When Mounting on a Wall
Be sure to use the following optional wall-mount brackets to hang the TV on
the wall.
KLV-S 19A 10: SU-WLI 1
KLV-S23A 10/KLV-S26A 10/KLV-S32A 10:SU-WL31
See the Instruction Guide supplied with the wall-mount blacket on how to
mount the TV on the wall.
11