Cancelling The Wake Up Timer - Pioneer XC-L77(DU-L77) Operating Instruction

The 'on' time is whatever was
last set for the wake-up timer
Adjust it to what you want.
Remember: the time is
displayed as a 24-hour clock
The 'off ' time is automatically
set to an hour later than the
'on' time
Adjust it to what you want

Cancelling the Wake Up Timer

Tip
Although you can't di-
rectly edit the wake-up
settings once they're
made, if you cancel the
wake-up timer then set
it again, the previous
settings will show up in
the display.
If the clock and sunrise
indicators are lit, then when
you press ...
SET
...the wake-up timer is
cancelled
3 Set the time to switch on.
First, set the hour:
Use the $ and › buttons to change the flashing hour display, then
press .
SET
Next, set the minute:
Use the $ and › buttons to change the flashing minute display,
then press .
SET
4 Set the switch off time.
Set the hour:
Use the $ and › buttons to change the flashing hour display, then
press .
SET
Next, set the minute:
Use the $ and › buttons to change the flashing minute display,
then press .
SET
After pressing , the display shows you the settings you've just made,
SET
including the switch on and off times, the component, and the volume level.
The clock and sunrise symbols in the display indicate that the wake up timer
is active.
Note: for the wake-up timer to work, the system must be in standby mode,
so remember to switch the system off before going to sleep. (In standby mode
you can check the timer settings by pressing
The wake-up timer doesn't automatically cancel, since you may well want to have the
system switch on every morning at the same time, for example.
SET
AUX/CD-R SOUND
STANDBY/ ON
1 Select WAKE-UP from the timer menu.
Remember: switch between timer menu options using the $ and ›
buttons; select the option by pressing
After pressing , the timer indicator in the display goes out.
SET
8 Using the Timer
TIMER
TIMER
& $
DISPLAY SET MD TAPE TIMER/
! —
REC CHARACTER CANCEL
4
.
SET
.)
›
VOL
+ ⁄
¢
39