Adjusting The Sound - Pioneer XC-L77(DU-L77) Operating Instruction

4 Switching On

Adjusting the Sound

Tip
In step 3, if more than
5 seconds goes by
without you pressing a
button, the system as-
sumes you're happy
with the new level and
sets it for you, without
you having to press
SET (step 4).
Choose to control the low
BASS
frequency sounds
Display shows the current level
New level after adjusting
18
6 To skip back or forward to another track,
press (but don't hold) $ or › .
Pressing › once skips to the start of the next track on the disc. Further
presses take you to subsequent tracks.
Pressing $ once takes you to the beginning of the current track. Further
presses skip to the start of previous tracks.
You can use the track skip buttons while the disc is paused, too. The track
number changes while the disc remains paused.
To stop playback, press & .
7
If the disc was paused, then the pause mode is cancelled.
On the previous page, you may have adjusted the volume while the CD was playing.
Volume is adjustable from zero (silence) to 36 (maximum volume) using the volume
and buttons on the remote.
UP DOWN
So that you can adjust the sound to your liking, you can also adjust the bass, treble,
balance and subwoofer level. Start a disc playing before working through the steps
below so that you can hear the effect of changes as you make them.
SOUND
AUX/CD-R SOUND
STANDBY/ ON
SET
1 Press SOUND.
Press repeatedly to switch between:
- -
BASS TREBLE BALANCE
Stop on the one you want to adjust.
2 Press SET.
The display shows the current level.
Use the $ and › buttons to adjust the
3
level.
The display indicates the level as you change it. (The subwoofer has just three
settings: ,
LOW MEDIUM
4 When you're happy with the level, press
SET again.
& $
DISPLAY SET MD TAPE TIMER/
! —
REC CHARACTER
CANCEL
4
-
WOOFER LEVEL
and .)
HIGH
›
VOL
+ ⁄
¢