Setting The Writing Speed - Teac CS-Single-12 User Manual

3.6 Setting the Writing Speed

The CS-Single-12 SLAVE drive is capable of writing information to a
CD or CD-ROM drive at normal (1X), double (2X), four times (4X),
eight times (8X) or twelve times (12X) normal speed. The writing speed
is set as described below. Once the speed is selected, it is used in the
CD copying and testing modes. It has no effect on the compare opera-
tions.
1. Press the MODE button until the display shows:
2. Press ENTER.
3. Press the MODE key to cycle between twelve-times-speed (12X),
eight-times-speed (8X), quadruple-speed (4X), double-speed (2X)
and real-time (1X) mode.
4. Press ENTER to confirm the selection.
NOTE
If you are in doubt what speed will work best, pick real-time
first and experiment with the faster settings later. Usually, how-
ever, you should be able to copy most discs at the 12X speed.
54
Mode select Mode select Mode select Mode select Mode select
5 Write speed 5 Write speed 5 Write speed
5 Write speed 5 Write speed
Speed select Speed select Speed select Speed select Speed select
12x Write 12x Write
12x Write 12x Write 12x Write
3. Modes