Central Hydraulics MOTORCYCLE LIFT 94813 Assembly And Operating Instructions Manual page 7

FIGURE C
WARNING! As an additional safety precaution, ALWAYS lower the Safety Bar
(11) completely and make sure it rests between the teeth of the Lifting Arms
(24) when the Motorcycle Lift is in its raised position. To do so, raise the Mo-
torcycle Lift to slightly above the desired height. Lower the Safety Bar and, while
holding the Safety Bar in its lowered position, slowly lower the Motorcycle Lift until
the Safety Bar is firmly settled between the teeth of the Lifting Arms.
(See Figure C.)
To Attach The Tire Stop Plate:
1. Step on and hold down the right side of the Foot Air Valve (48) until the Platform (8)
of the Motorcycle Lift reaches its maximum height. Then, lower and lock the Safety
Bar (11) in position. (See Figures A and C.)
For technical questions, please call 1-800-444-3353
SKU 94813
ASSEMBLY INSTRUCTIONS
SAFETY BAR HANDLE
(14)
LIFTING ARM
TEETH
(24)
SAFETY BAR
(11)
PAGE 7