Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Prolonged expo- sure to high intensity noise is liable to cause hearing loss. SKU 66305 for technical questions, please call 1-800-444-3353. risk of electric Shock. this tool is not provided with an insulated gripping surface. Contact with a ″live″...
National pipe thread, straight WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved eye protection. chart continued in next column. SKU 66305 for technical questions, please call 1-800-444-3353. Symbol Definitions WARNING marking concerning Risk of Hearing Loss. Wear hearing protection.
Page 5
Lift when it is not loaded. Do not lower the motorcycle quickly. Only use the Load Pedal (69) to slowly lower the Lift when there is a SKU 66305 for technical questions, please call 1-800-444-3353. motorcycle on it. NEVER allow the vehicle to drop suddenly.
Page 6
SKU 66305 for technical questions, please call 1-800-444-3353. to adequately secure the lift could result in serious injury or death in the event the lift tips over.
When unpacking, check to make sure that the item is intact and undam- aged. If any parts are missing or bro- ken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible. note: This item is pre-assembled at the factory.
Page 9
Pull Pin (7) Figure 3 Roll the front wheel over the Front Wheel Chock (17) and into the Wheel SKU 66305 for technical questions, please call 1-800-444-3353. Rest (21). The Front Wheel Lock will rotate with the wheel, supporting it from the rear.
Page 10
Disengage the Safety Bar (75) from the ramp of the Inner Scissor Arm (35). Swing the Safety Bar up and SKU 66305 for technical questions, please call 1-800-444-3353. insert the Safety Bar Lock Pin (40) into the hole in the upper axle of the Safety Bar.
O-ring at pump (18a) or Oil Seal pump and cylinder (3a or 10a) is worn out. follow all safety precautions whenever diagnosing or servicing the tool. SKU 66305 for technical questions, please call 1-800-444-3353. cleaning Maintenance and Lubrication note: These procedures are in addition to...
Page 13
Retaining Ring Rear Tie-Down Point Retaining Ring Rubber Gasket Inner Scissor Arm Retaining Ring Outer Scissor Arm SKU 66305 for technical questions, please call 1-800-444-3353. item # description Safety Bar Lock Pin Locking Bolt Assembly Washer Screw Lever Linkage Assembly...
Page 14
All parts for the Hydraulic Ram Assembly have an “a” suffix, such as “19a”. Do not confuse these part numbers with the part numbers for the Overall Assembly which are listed on page 13, and have no suffix. SKU 66305 for technical questions, please call 1-800-444-3353. Page 14...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 66305 for technical questions, please call 1-800-444-3353. part description...
LiMited 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.