Programming The Mmsi - Standard Horizon GX2150 Owner's Manual

How can I obtain an MMSI assignment?
In the USA, visit the following websites to register:
http://www.boatus.com/mmsi/ or
http://seatow.com/boating_safety/mmsi.asp
In the Canada, visit
http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf01032e.html or
http://www.usps.org/php/mmsi/rules.php

9.2.2 Programming the MMSI

A user MMSI can be inputted only once. Therefore please be careful
not to input the incorrect MMSI number. If you need to change the
MMSI number after it has been entered, the radio will have to be returned
to Factory Service. Refer to the section "16.2 FACTORY SERVICE."
1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "MMSI
SETUP".
3. Press the
soft key.)
4. Rotate the CHANNEL knob to select the first
number of your MMSI, then press the
soft key to step to the next number.
5. Repeat step 4 to set your MMSI number (nine
digits).
6. If a mistake was made entering in the MMSI
number, press the
wrong number is selected, then rotate the
CHANNEL knob to correct the entry and press the
soft key.
7. When finished programming the MMSI number,
press and hold the
ask you to input the MMSI number again. Use steps
4 - 6 above.
8. After the second number has been input, press and hold the CHANNEL
knob to store the MMSI, then press the
operation.
To view your MMSI after programming to ensure it is correct, perform
steps 1~3. Look that the MMSI number shown on the display is correct.
GX2000/GX2150
WARNING
key until the
soft key. (To cancel, press the
soft key until the
soft key. The radio will
NOTE
soft key to return to radio
Page 43