Setting Up The Base Station And Charging Cradle (If Included); Connecting The Base Station - Siemens Gigaset C380 User Manual

First steps

Setting up the base station and charging cradle (if included)

The base station and charging cradle are designed for use in enclosed dry rooms
with a temperature range of +5 °C to +45 °C.
¤ Set up the base station and charging cradles at a central location on a flat, non-
slip surface in your house or apartment.
Please note
Pay attention to the range of the base station.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode (¢ page 41) is activated.
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Instructions on how to mount the base station and charging cradle to a wall, see
¢ page 66.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

Connecting the base station

¤ First connect the
mains adapter 1.
¤ Then connect the tel-
ephone jack
insert the cables into
the cableducts.
Please note:
u The mains adapter
must always be con-
nected, as the phone
will not operate with-
out mains connection.
u Only use the mains adapter and phone cord supplied. Pin connections on tele-
phone cables can vary (pin connections ¢ page 61).
8
and
2
2 1
1 1
1 1