Southwestern Bell FA970 Owner's Manual page 7

For your reference, keep a record of the date purchased.
Please save sales receipt for warranty reference.
Date of Purchase ____________________
INSTALLATION
CAUTION
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the incoming
telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines. Note: Refer to "FCC
Requirements" section on page 18 before connection to telephone line.
To Connect the AC Adaptor
Connect the AC adaptor into the back of the unit. Plug the other end into the AC wall
power outlet (Fig C). Do not attach (staple, etc.) the AC Adaptor cord to the
building wall.
To Install One 9 Volt Battery
Connect the AC adaptor Before installing the battery
One 9 volt battery (not included) is required to maintain your personalized greeting
and recorded messages during a power failure. If there is a power failure and the
battery is not installed, both your personalized greeting and recorded messages will
be lost.
IMPORTANT NOTICE
7