Panasonic SC-HT05 Operating Instructions Manual page 9

Home theater audio system model no. sc-ht07; sc-ht05
Table of Contents

Advertisement

Supplied
System cable
accessories
Note
• Use digital connection to enjoy Dolby Digital or DTS.
Notes on digital input
This unit can decode the following signals:
• Dolby Digital, DTS
• PCM, including PCM with sampling frequencies of 96
or 88.2 kHz
It cannot decode:
• Other digital signals, such as MPEG
• Dolby Digital RF signals from a laser disc player
(For continental Europe and the
United Kingdom)
21-pin scart cable (not included)
AV1 (TV OUT):
Connect to the 21-pin scart (IN) terminal on a television if
you have connected equipment to AV2 (DVD IN) or AV3
(DVR/VCR1 IN). This unit must be on to output audio/video
signals to the television.
AV2 (DVD IN):
Connect to the 21-pin scart (OUT) terminal on a DVD player.
Change the AV output setting for DVD to "SCART" (
AV3 (DVR/VCR1 IN):
Connect to the 21-pin scart (OUT) terminal on a DVD
recorder or VCR. Change the AV output setting for VCR to
"SCART" (
page 22). For Q Link* to work, connect to this
è
terminal.
AV1 (TV OUT)
(TV) IN
(DVR) IN (DVD) IN
OPT 1
OPT 2
COAXIAL
DIGITAL IN
Coaxial cable (not included)
Used to connect to the DIGITAL COAXIAL OUT terminal
on a DVD player to input audio digital signals.
SC-HT07
(For areas other than continental Europe and the
United Kingdom)
S-Video cable (not included)
S-VIDEO
MONITOR OUT
IN
IN
IN
TV
DVR / VCR1
DVD
TV or
S-VIDEO
IN
monitor
Used to connect to the S-VIDEO IN terminal on a television.
* Q Link (registered trademark of Panasonic)
DATA LOGIC (registered trademark of Metz)
Easy Link (registered trademark of Philips)
Megalogic (registered trademark of Grundig)
SMARTLINK (registered trademark of Sony)
AC mains lead
or
or
(x 1)
page 22).
è
AV2 (DVD IN)
AV3 (DVR/VCR1 IN)
DVD
S-VIDEO
player
OUT
Used to connect to the
S-VIDEO OUT terminal
on a DVD player.
Remote control transmitter
(x 1)
(x 1)
The remote control
3
• Insert so the poles (+ and –) match those in the remote
control.
• Do not use rechargeable type batteries.
Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m directly in front of the unit.
Remote control signal sensor
^
SFC
8
INPUT SELECTOR
MUSIC
AV/MOVE
TUNE
TUNE
VIDEO IN
L AUDIO IN R VCR 2
7 meters
Transmission window
Note
• Keep the transmission window and the unit's sensor free from
dust.
• Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
Insertion of connector
Even when the connector is perfectly inserted, depending on the type
of inlet used, the front part of the connector may jut out as shown in
the drawing.
However there is no problem using the unit.
Appliance inlet
Approx. 6 mm
Power plug adapter (included) (For areas other than continental
Europe, the United Kingdom, Australia, and New Zealand)
If the power plug does not fit your socket, use this adapter.
Batteries
(x 2)
1
R6/LR6, AA, UM-3
2
2
VOLUME
DOWN
UP
PHONES
Connector
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-ht07

Table of Contents