Panasonic SC-HT05 Operating Instructions Manual page 20

Other functions
4 5 6
7 SC-HT07 8 9
-/--
DIRECT TUNING
>
0 10
=
DISC
TUNER/BAND
u/t y/i
g h
TOP MENU
DIRECT
NAVIGATOR
ENTER
DISPLAY
TV VOL
CENTER
SUBWOOFER
TV/AV DIMMER
INPUT
MODE
/L
TEST
TONE/ EFFECT
BALANCE SLEEP LEVEL
SFC
STEREO/
2CH MIX MUSIC
%PL
OFF
Center Width Control "C-WDTH"
You can adjust the effect of MUSIC and PANORAMA with the
center width control.
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
The default level is 3.
Remote control
1. Press [EFFECT] to select "C-WDTH".
2. Press [–/L] or [+/R] to adjust the effect.
Dimension Control "DIMEN"
You can adjust the effect of MUSIC and PANORAMA with the
dimension control.
You can make up for differences in the output level of the front
and surround speakers.
You can choose a level between –3 and +3 — Increase the level
to move sound to the front speakers, decrease to move it to the
surround speakers.
The default is level 0.
Remote control
1. Press [EFFECT] to select "DIMEN".
2. Press [–/L] or [+/R] to adjust the effect.
Muting
Remote control
Press [MUTING].
To cancel
Press [MUTING] again.
Muting is also canceled when the unit is turned off.
20
4 5 6
VOLUME VOLUME
7 SC-HT05 8 9
DIRECT TUNING -/--
>
0 10
=
DISC
MUTING
u i t y
q g h q
MENU TOP MENU MENU
PLAY PLAY
DIRECT
LIST NAVIGATOR LIST
ENTER
RETURN DISPLAY RETURN
TV VOL TV VOL TV VOL
FOCUS DVD RECORDER
MUTING
DIMMER TV/AV
DVD/HDD
INPUT
/R
MODE TEST
CENTER
FOCUS EFFECT
SUBWOOFER
LEVEL
SFC
STEREO/
AV/MOVIE 2CH MIX MUSIC AV/MOVIE
%PL
OFF
Center focus
(This works on digital signals that have a center channel)
You can make the sound of the center speaker seem like it is
coming from within the television.
Remote control
Press [CENTER FOCUS].
"C.FOCUS" lights.
The factory setting is off.
The center focus cannot be used in the following case.
When input signal is PCM or analog stereo.
When DVD ANALOG 6CH is selected.
Subwoofer level
For selecting subwoofer level.
Remote control
Press [SUBWOOFER].
Adjust the level in 5 steps:
SW MIN, SW 5, SW 10, SW 15, and SW MAX.
" "
Select SW - - - to stop output.
Note
Sound can be distorted if you raise the volume while subwoofer
level is high. Reduce subwoofer level if this occurs.
Input mode
This unit automatically detects whether input is digital or
analogue, but you can fix the input mode.
Remote control
Press [INPUT MODE] to select "AUTO", "ANALOG" or
"DIGITAL".
PCM/DTS fix mode
In rare cases, the unit may have trouble recognizing the digital
signals on discs.
• With the PCM signals on CDs, this may cause the beginning
of a track to be cut off. Engage the PCM FIX mode if this
occurs.
• With DTS, the signals may not be recognized at all. Engage
the DTS FIX mode if this occurs.
While the input source is selected:
Remote control
1. Press [INPUT MODE] to select "DIGITAL".
2. Press and hold [INPUT MODE] for four seconds.
The current mode is displayed. Press again to change the mode.
Each time you press the button:
AUTO → PCM FIX → DTS FIX
When a FIX mode is on, the unit cannot process other signals.
This may cause noise to be output. Select "AUTO" if this occurs.
The mode returns to AUTO when you switch the unit to standby.
For your reference
If you are playing a DTS CD that contains both DTS and PCM,
but it isn't playing properly, then do the following after step 1
above: Use the MULTI CONTROL to enter the "OPTION" –
"DTS-PCM" menu and select "ON". If this causes noise to occur,
return the setting to "OFF". (This setting is effective for each
digital source.)