Timer; Sound Adjustment - Panasonic SC-EN38 Operating Instructions Manual

Timer

The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function on/off.
• Each time you press the button:
OFF (Canceled)
g To check the remaining time
The play timer and sleep timer can be used together. The sleep timer
always has priority. Be sure not to overlap timer settings.

Sound adjustment

Sound quality
You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
• Each time you press the button:
HEAVY CLEAR
(Adds punch to (Clarifies higher
rock) sounds)
EQ-OFF
(Canceled)
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo
sound.
Press [SURROUND] to turn the Live Virtualizer on/off.
Note
The actual effect depends on the source played.
Press [SLEEP] once
EQ
SOFT
(For background
music)
VOCAL
(Adds gloss to vocals)
➡ Page 3 for the buttons position of remote control.
You can set the timer to come on at a certain time to wake you up.
Preparation:
• Turn the unit on and set the clock.
• Prepare the music source (disc, radio, iPod or music port) and set the
volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
zPLAY
 Within 5 seconds, press [u, 2] or [i, 1] to set the starting time.
 Press [CLOCK/TIMER] to confirm.
 Repeat steps 2 and 3 to set the finishing time.
To activate the timer
 Press [zPLAY] to turn on the timer.
 Press [^] to turn off the unit.
To Action
Change the settings Repeat steps 1 to 4 and 6.
Change the source or
 Press [zPLAY] to clear zPLAY indicator
volume
from the display.
 Make changes to the source or volume.
 Perform steps 5 and 6.
Check the settings Press [CLOCK/TIMER] repeatedly to select
(when the unit is on or
zPLAY.
in standby mode)
Cancel Press [zPLAY] to clear the timer indicator
from the display.
• The timer will start at the preset time, with the volume increasing
gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while the timer is functioning, the
finish time setting will not be activated.
• When external unit is selected as the source when the timer comes
on, the system turns on and engages external unit as the source. If
you wish to playback from the portable audio equipment, activate the
equipment's play mode and increase the volume. (See the portable
audio equipment's instruction manual.)
Enhancing the bass
Enables you to enjoy the powerful bass effect.
Press [D.BASS] to turn the D.BASS function on/off.
Note
The actual effect depends on the disc.
Re-master -
Enjoying more natural sound
MP3
Digital remaster is effective on CD (MP3) and USB
Analog remaster is effective on iPod and Music Port
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
Press [REMASTER] during play to select "RE-MASTER ON".
• Each time you press the button:
Original display
9