Quick Start; Optical Image Stabilizer Function - Panasonic SDR-H81 Operating Instructions Manual

Quick start

This unit will resume recording/pause mode
about 0.8 seconds after the LCD monitor is
reopened.
≥ When in quick start standby mode about
60% of the power used in recording pause
mode is being consumed, so the recording
time will be reduced.
¬ Rotate the mode dial to select
.
1
Select the menu. (l 22)
[SETUP] # [QUICK START] # [ON]
2
Close the LCD monitor while the
mode dial is set to
The status indicator A flashes green and the unit
goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator A lights red and the unit is
put into recording pause approx. 0.8 seconds
after it is turned on.
To cancel Quick start
Select [SETUP] # [QUICK START] # [OFF]
≥ The default setting is on.
≥ Quick start standby mode is cancelled if
jabout 5 minutes elapsed
jthe mode dial is switched
jthe battery is removed or the AC adaptor is
disconnected
≥ In the quick start mode it may take some time for
automatic white balance to adjust, if the scene
being recorded has a light source different from
the scene last recorded. (When the colour night
view function is used, however, the white
balance of the scene last recorded is retained.)
≥ In the quick start mode, the zoom magnification
becomes 1k and the picture size may differ from
what it was before quick start standby mode.
≥ If [ECONOMY] (l 23) is set to [5 MINUTES]
and the unit automatically goes into quick start
or
standby mode, close the LCD monitor and then
open it again.
Optical image stabilizer
function
Reduces the image shaking (jitter) due to hand
movement when recording.
or .
¬ Rotate the mode dial to select
Press the O.I.S. button.

O.I.S.: Optical Image Stabilizer
The image stabilizer icon [
To cancel the optical image stabilizer function

Press the O.I.S. button again.
≥ The default setting is on.
≥ Set the intelligent auto mode to off before turning
the optical image stabilizer function to off.
≥ When a tripod is used, we recommend that you
turn the image stabilizer off.
≥ In the following cases, the image stabilizer
function may not work effectively.
jWhen the digital zoom is used
jWhen the unit is shaken greatly
jWhen you record a moving subject while
O.I.S.
tracking it
.
or
] appears.
37
LSQT1555