Image Stabilizer Function; Recording With The Video Light [Sdr-H86] - Panasonic SDR-H86 Operating Instructions Manual

Image stabilizer function

Optical image stabilizer can stabilize the
image without decreasing the image quality
as much.
¬ Change the mode to
Optical image stabilizer button
Pressing the button changes the
optical image stabilizer setting.
# # OFF
≥ Set the manual mode before setting
the Optical Image Stabilizer function
to off.
: Active mode
This setting gives more stabilization and
is suitable for recording when walking.
: ON
This setting is suitable for recording in a
stable state such as scenery.
≥ Stabilization may not be possible under
strong shaking.
≥ When a tripod is used, we recommend
that you turn the image stabilizer off.
Recording with the video
light [SDR-H86]
The video light enables brightening of the
images taken in a dimly-lit place.
.
¬ Change the mode to
Light/Delete button [LIGHT/ ]
Each time the button is pressed, the
indication changes by one setting in the
following order.
Turns on/off automatically according to
brightness of the surroundings.
≥ Lights up when the lens cover is
closed.
≥ Auto video light will turn on/off in
conjunction with Low light mode in
Intelligent auto mode.
≥ When the motion picture video light is in
use, the recordable time when using the
battery is shortened.
≥ The subject should be within 1.5 m of the
unit.
≥ Using the Colour night view function at the
same time will make conditions even
brighter.
≥ If you turn off the unit or change the mode,
the video light is turned off.
# # Setting cancelled
/
: Always on.
/ :
.
LIGHT/
47
VQT2N67