Panasonic SDR-H86 Operating Instructions Manual page 108

Problem
When connected by
the USB cable, this
unit is not detected by
the PC.
When the USB cable is
disconnected, an error
message will appear
on the PC.
The power of the DVD
burner cannot be
turned on.
The sound does not
play back properly
when a DVD disc that
has been copied using
the DVD burner is
played back.
Cannot see the PDF
operating instructions
for VideoCam Suite
3.0.
108
VQT2N67
≥ After re-inserting the SD card into the unit, reconnect
the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 89)
≥ Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
≥ When the unit is connected to the DVD burner, use
the respective AC adaptors for both this unit and the
DVD burner.
≥ When the scenes are copied to a DVD disc using the
DVD burner and then played back with any other
devices, sound may not play back properly.
In this case, use the software supplied with this unit
to copy the scenes.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for VideoCam Suite 3.0.
Check points