Panasonic SC-BT100 Operating Instructions Manual page 35

"Picture" menu
Still Mode [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback
( 44, Frames and fields).
[DVD-VR]
Seamless Play
Select the play mode between playlist chapter segments and
partially deleted titles.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
"Sound" menu
Dynamic Range Compression
[BD-V] [AVCHD] [DVD-V] [DivX[ (Dolby Digital, Dolby Digital Plus and
Dolby TrueHD only)
Change the dynamic range (
Speaker ( 37)
Make settings for your speakers if you have made the 5.1ch or 7.1ch speaker system.
≥The settings are effective only when you have a 5.1ch or 7.1ch speaker system with the unit.
BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode.
≥When this is set to "On", Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio and DTS-HD High Resolution Audio
are output as Dolby Digital.
"Display" menu
On-Screen Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to "On", the masked-off area on the
screen becomes gray.
[Only when connecting with an HDMI cable or a
component video cable and "HDMI Video Format" (
is set to any other mode than "576p/480p", or "Component
Resolution" ( 36) is set to "720p" or "1080i".]
FL Display
Changes the brightness of the unit's display.
≥The brightness of the volume indicator (
Software Licence
44) for late night viewing.
36)
13) is also changed.
≥[Automatic]
≥Field:
Select if jittering occurs when "Automatic" is
selected. (The picture is coarser.)
≥Frame: Select if small text or fine patterns cannot be seen
clearly when "Automatic" is selected. (The picture
is clearer and finer.)
[On]
≥
: The chapters in playlists are played seamlessly.
This does not work while searching or when there
are several audio types included on the playlist.
Additionally, the positioning of chapter segments
may change slightly.
≥Off:
The points where chapters in playlists change are
played accurately, but the picture may freeze for a
moment.
[NTSC]
≥
: NTSC discs are played as NTSC.
≥PAL60: Select if picture is not displayed correctly when
"NTSC" is selected.
≥On
≥[Off]
≥
On
: The primary audio and secondary audio are mixed
and output. The sampling frequency is converted to
48 kHz.
[Off]
≥
: The clicking sound on the menu and secondary
audio are not output.
[Automatic]
≥
≥Off
[English]
≥ ≥Français ≥Español ≥Deutsch ≥Italiano
≥Nederlands
[On]
≥
:
If there is no operation for 10 minutes or more, the displayed
screen switches to the other states automatically.
–When the Direct Navigator or FUNCTIONS menu is displayed,
the display returns to the screen saver mode.
–When CD or MP3 is played, the display returns to the screen
saver mode. (Playback continues.)
–When still pictures are shown (except for slide shows), the
display returns to the Direct Navigator screen.
–During FM radio broadcast reception, the display returns to the
screen saver mode. (Reception continues.)
≥Off
≥[Bright]
≥Dim:
The display is dimmed.
≥Automatic: The display is dimmed, but brightens when you
perform some operations.
Information about the software used by this unit is displayed.
RQT9161
35