Double Insulated Tools: Tools With Two Prong Plugs; Extension Cords - Chicago Electric 92798 Operating Instructions Manual

Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper

DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS

1. Tools marked "Double Insulated" do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian
Standard Association, and the National Electrical Code.
2. Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure A.)
FIGURE A
Grounded tools require a three wire extension cord. Double Insulated tools
1.
can use either a two or three wire extension cord.
2. As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a
SKU 92798 For technical questions, please call 1-800-444-3353.
GROUNDING
WARNING!
outlet installed by a qualified electrician.

EXTENSION CORDS

120 VOLT, GROUNDED,
ELECTRICAL OUTLET.
Page 7