Selecting The Sound Mode (Depending On The Model) - Samsung SP42W4 Owner's Instructions Manual

Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-
Stereo
Stereo
➣
N If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
N If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
N When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
(depending on the model)
On-screen indication
Mono (Normal use)
↔
Mono Mono
Nicam (Normal)
Stereo ↔
Mono
Nicam (Normal)
Dual-I ¡ Dual-II ¡ Mono
Nicam Nicam (Normal)
Mono (Normal use)
Dual-I ↔ Dual-II
Stereo ↔
Mono
(Forced mono)
ENG
35