Adjusting Convergence - Samsung SP42W4 Owner's Instructions Manual

Adjusting Convergence

If the color appears spread out or "smeared" on the screen, the
convergence probably needs alignment. Be sure to use the remote
control for the convergence adjustments. (The Convergence
Adjustment can not be made by using the control buttons on the
front panel.)
1
Press the MENU button.
Result: The main menu is displayed.
Press the M or L button to select Setup.
2
Result: The options available in the Setup group are
displayed.
3
Press the button.
Press the M or L button to select Convergence. Press the
4
button.
Result: The options available in the Convergence group are
displayed with Red is selected.
5
Press the button again.
Result: A crosshair pattern is appeared.
6
Adjust convergence by using your remote control.
N Use the M/L/➛/❿ buttons to all directions for select the
position.
N Press the "0" button to select red or blue convergence.
N To move the line so that it is superimposed on the horizontal
or vertical center-line, use the
make a signal horizontal or vertical line that is as white as
possible).
N Press the MENU (
You can adjust convergence automatically for the optimum in the
factory.
7
Select Perfect Focus in the Setup group, then press the
button.
Result: Perform Perfect Focus in the following sequence:
green © red © blue.
After the cursor flickers for one second, the perfect
focus feature ends.
➣
When the size of the sub picture is selected to the "12 PIP"
or "3 PIP" mode, the Perfect Focus feature does not work.
, , , buttons (i.e.,
) button to exit.
TV Setup
√ √
Language
√ √
Time
√ √
Convergence
√ √
Plug & Play
√ √
AV Setup
√ √
Demonstration
Blue Screen On
... ... † † Move Enter
Convergence
√ √
Red
√ √
Blue
√ √
Perfect Focus
... ... † † Move
Enter
Please, Use remote control
Red
Position 0 R/B
Up/down L/R Exit
Convergence
√ √
Red
√ √
Blue
√ √
Perfect Focus
... ... † † Move
Enter
Perfect Focus
Progress Exit
4%
17
ENG
Exit
Exit
Exit