Selecting The Sound Mode (Depending On The Model) - Samsung CW-29A208T Owner's Instructions Manual

Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "DUAL-I " or "STEREO", depending on
the current transmission.
Type of broadcast
NICAM
Stereo
A2
Bilingual or Dual-I/II
Stereo
➢
N If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
N If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
N When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
Get user manuals: See SafeManuals.com
On-screen indication
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
STEREO ↔ MONO
NICAM Stereo
DUAL-
NICAM Dual-I/II NICAM
Regular broadcast
(Standard audio)
STEREO ↔ MONO
Stereo
(depending on the model)
MONO (Normal use)
MONO ↔ MONO
NICAM (Normal)
NICAM (Normal)
¡ DUAL- ¡ Mono
I II
NICAM (Normal)
MONO (Normal use)
↔ DUAL-
I II
DUAL-
(Forced mono)
English-29