Using the Buttons on the Panel If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to: ◆ Switch on the TV when it is in Standby mode and select channels ( ◆...
Connection Panels ➢ The actual configuration on your TV may be different, depending on your model. Side of the TV Rear of the TV 75Ω Coaxial Connector for Aerial or Cable Network SCART Audio/Video Input/Output ➢ For further details about connection, refer to pages 51~55.
Connecting to the External Input/Outputs ➢ EXT-1 is used for the equipment with an RGB output, such as video game devices or video disc players. Rear of the TV ① This end can be fitted with: ◆ A SCART connector ◆...
Connecting to the Audio Output ➢ The RCA (AUDIO-L and R) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system...
Connecting to the RCA Input ➢ The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices. Side of the TV (depending on the model) Camcorder Video game device...
Connecting to the S-Video Input ➢ The S-VIDEO (or S-VIDEO INPUT) and RCA (AUDIO-L and R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV (depending on the model) ① Camcorder ①...
Connecting to the Component Input Rear of the TV DTV receiver ➢ The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i,576p, 1080i)