Using The Timer; Using The Play/Record Timer - Panasonic SC-AK44 Operating Instructions Manual

5
4
2 3
1
FOR PLAY TIMER
2
SC-AK44
SC-AK33
SC-AK22
SC-AK12
FOR PLAY TIMER
3
SC-AK44
SC-AK33
SC-AK22
SC-AK12
FOR PLAY TIMER
4
FOR PLAY TIMER
PLAY
5
1 2 3
FOR RECORD TIMER
FOR RECORD TIMER
FOR RECORD TIMER
FOR RECORD TIMER
REC

Using the timer

Using the play/record timer

The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
Preparations
•
Turn the unit on and set the clock (A page 11).
•
For the play timer, prepare the music source you want to listen to;
tape, CD, radio or aux, and set the volume.
•
For the record timer, check the cassette's erasure prevention tabs
(A page 20: B), insert the tape in deck 2, select the reverse mode
(for SC-AK44) (A page 22) and tune to the radio station (A page
12) or select the aux source (A page 29).
Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK PLAY
Previous display
rPLAY : to set the play timer
rREC
: to set the record timer
Setting the start and finish times
1
(Within 8 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to select the
starting time.
2 Press [CLOCK/TIMER].
1 Press [TUNE/TIME ADJ (3) or (4)] to select the
finishing time.
2 Press [CLOCK/TIMER].
The start and finish times are now set.
Turning the timer on
Press [rPLAY/rREC] to display the timer indicator.
Every time you press the button:
PLAY REC
(OFF) (OFF)
rPLAY : to turn the play timer on
rREC : to turn the record timer on
(The indicator doesn't appear if the start and finish times or the
clock haven't been set.)
Press [f/I, POWER] to turn the unit off.
The unit must be off for the timers to operate.
•
For play timer
The timer play will start at the preset time with volume
increasing gradually up to the volume level you preset.
•
For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [rPLAY/rREC] to clear the timer indicators from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when unit is on)
•
To change the play/record times
Do steps 1, 2, 3 and 5.
•
To change the source or volume
1. Press [rPLAY/rREC] to clear the timer indicator from the
display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
(Continued on next page)
REC
27
RQT5621