Place The Speakers Using The Base Stands - Panasonic SC-HTB15 Operating Instructions Manual

∏ 1 Speaker (L)
∏ 2 Bases
≥ For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Insert the speaker cable through the base.
≥ Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
A Threading hole
Attach the speaker to the base.
≥ To make sure that the speaker cable is connected to the correct speaker, match the colour of the speaker connector with the
colour of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥ Keep the screws out of reach of children to prevent swallowing.

Place the speakers using the base stands

∏ 1 Speaker (R)
∏ 2 Screws B
(Small)


B Screw hole
∏ 2 Speaker cables
Leave about 110 mm
Position the cable between the ridges.
(L): WHITE
(R): RED
Screw B (supplied)
≥ Tighten securely.
(Continued on the next page)
15
VQT3R83