Sync; H-Freq. (Khz)/V-Freq. (Hz) - Panasonic TH-37PW5 Operating Instructions Manual

Setup for input signals

Sync

Select Signal from the "Setup" menu during RGB or PC input signal mode.
R
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input).
H & V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
on VIDEO: Compatible with the scart plug (Europe)
The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.
Setting PC sync signal:
Confirm that the input is set to PC input (this setting is valid only for PC input).
H & V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.

H-Freq. (kHz)/V-Freq. (Hz)

Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input and PC input.
Display range:
Horizontal 15.6 - 110 kHz
Vertical 48 - 120 Hz
34
Press to adjust.
Press to exit from adjust mode.
Setup
Component/RGB-in select
RGB
Si nal
g
Screensaver
lish ( UK )
OSD Lan ua e En g
g g
Press (ACTION) button
Signal
Sync H & V
H-Freq. 31.5 kHz
V-Freq. 60.0 Hz
Signal
Sync H & V
H-Freq. 31.5 kHz
V-Freq. 60.0 Hz
Sync H & V
Sync on G
Sync on VIDEO
Sync H & V
on G
Sync
H-Freq. kHz
31.5
V-Freq. 60.0 Hz
[ RGB ]
[ PC ]