Colour System / Panasonic Auto; 3:2 Pulldown - Panasonic TH-37PW5 Operating Instructions Manual

Colour system / Panasonic Auto

Select Signal from the "Setup" menu during AV(S Video) input
signal mode. ("Signal [AV]" menu is displayed.)
Mode
Colour system
Panasonic Auto
(4:3)

3:2 Pulldown

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Select "Signal" from the "Setup" menu during AV(S Video) or Component
input signal mode. ("Signal [AV]" menu is displayed.)
Note:
When On, this setting only affects the following signal input.
• NTSC signal input during "AV(S Video)" input signal mode.
• 525i(480i) signal input during "Component" input signal mode.
R
Press to select the "Colour system" or "Panasonic
Auto".
Press to select each functions.
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Set the colour system to match the input signal. If set to "Auto", the colour system is
determined automatically.
Auto
Set to "4 : 3" to view 4:3 images in an unchanged format when Panasonic Auto is
selected. If you would like to view 4:3 images in "Just" format, set to "Just".
Press to select 3:2 Pulldown.
Press to set On/Off.
Press to exit from adjust mode.
Setup for input signals
Function
PAL SECAM
Setup
Component/RGB-in select
Si nal
g
Screensaver
OSD Lan ua e
g g
Press (ACTION) button
Signal
3D Y/C Filter ( NTSC )
Colour system
3:2 Pulldown
Panasonic Auto ( 4:3 )
M.NTSC NTSC
Setup
Component/RGB-in select
Si nal
g
Screensaver
OSD Lan ua e
g g
Press (ACTION) button
Signal
3D Y/C Filter ( NTSC )
Colour system
3:2 Pulldown
Panasonic Auto ( 4:3 )
Signal
3:2 Pulldown
RGB
lish ( UK )
En g
[ AV ]
On
Auto
Off
4 : 3
RGB
lish ( UK )
En g
[ AV ]
On
Auto
Off
4 : 3
[ Component ]
Off
33